FEATURES OF THE ARROW 4 WAY SIDE LOADER

THE ALLWAYS ARROW 4 WAY SIDE LOADER

THIS ALLWAYS ARROW 4 WAY SIDE LOADER IS IDEAL FOR TIMBER YARDS OR USE IN THE PLASTICS INDUSTRY FOR CARRYING LONG LOADS AND IS AVAILABLE FOR SHORT OR LONG TERM HIRE IN DERBY AND SURROUNDING AREAS.

Side Loader Fork Lifts In Derby

This 3 ton ALLWAYS ARROW 4 WAY SIDELOADER was designed and built by Allways Fork Truck Services Ltd based in Derby and has many unique features.

It was initially designed for a niche market in the plastics industry but has found uses in many other areas such as timber yards or any where where a long load needs to be handled.

Allways Fork Truck Services Ltd offer a range of side loader fork lifts in Derby to Hire or Buy

LIFT HEIGHTS RANGE FROM 3 M TO 6.5M.

It has many unique features to keep the machine running (albeit at a Lower spec) until an engineer can call should it break down.

We have this truck availalable for hire - Short or Long term

WE ALSO HAVE THE ALLWAYS ARROW 4 WAY SIDE LOADER AVAILABLE TO PURCHASE.

THE ALLWAYS ARROW'S MAIN FEATURES ARE SHOWN ABOVE AND LISTED BELOW

FEATURES OF THE ALLWAYS ARROW 4 WAY SIDE LOADER

MOTORS - SEGREGATED POWER CONTROLLERS TO EACH MOTOR MEANS THIS TRUCK WILL STILL RUN EVEN IF ONE MOTOR FAILS. Hydraulic "Flexiselect" control ensures that any 1 of the 3 units can operate full vital truck systems in the event of a motor or pump failure

REACH RACK & PINION POSITIVE DRIVE GIVES EVEN SPEED CONTROL OVER THE WHOLE LENGTH OF THE RERACH WITH THE MINIMUM NUMBER OF MOVING PARTS MOUNTED TO AVOID INGRESS OF DEBRIS INTO MECHANSIM.

MAST- DESIGNED SPECIFICALLY TO WITHSTAND HIGH TORTIONAL STRESSES INDUCED BY VERY LONG LOADS. THE NORMAL CONFIGURATION INCLUDES A 3 METRE FACEPLATE WITH HYDRAULIC FORK POSITIONER ONA TILTING FORK CARRIAGE.

CASTOR HEAVY DUTY DUAL SWIVEL UNIT MOUNTED ON A 12MM BALL SLEW RING

MOTORS UNIVERSAL STEERING AND DRIVE FROM HIGH DUTY MOTOR IN WHEEL

TRACTION UNITS MOUNTED AT EACH END ENSURES SOLID TRACTION AT ALL TIMES

CAB SPACIOUS CAB FULLY TESTED TO EUROPEON REGULATIONS. HEADROOM 1.9M (6'4") HIGH STRENGTH "GUIDE OFF" CORNERS DIVERT INTRUSIONS FROM DRIVER. CAN BE END OR CENTRALLY MOUNTED.

BED STEEL FABRICATION WITH SPECIAL FEATURES OF INTERCHANGABLE CENTRAL BED\SECTION. THE DIMENSIONS OF THIS TRUCK CAN BE ALTERED AT A FRACTION OF THE COST OF A NEW MACHINE SHOULD YOUR PRODUCT OR SYSTEM CHANGE.(600TO2500MM)

HYDRAULICS ULTRA QUIET PUMPS, FULLY FILTERED EXTERNAL TANK, STEEL AND SHIELDED PIPEWORK

GUIDE WHEEL AS PART OF THE ORIGINAL PARAMETERS A LARGE DIAMETER LATERALLY ADJUSTABLE WHEEL THAT REMAINS LONGDITUDENLY WITHIN THE PROFILE OFTHE TRUCK SO AS NOT TO FOUL FORKS

Contact Us

To organise the hire of a fork lift please call us on 01332 755442

For any enquires or queries do not hesitate to call. We will try to answer any questions you may have regarding suitabilty for your application.

Alternatively, please use the form on the Contact Us page of this website to forward your enquiry to us.